Bruker

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

For use with 0.7 mm MAS rotor

0.1% Ethylbenzene (EB) in Chloroform-d

0.0485 M Triphenylphosphat (TPP) in Acetone-d₆

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

3% Chloroform (CHCl₃) in Acetone-d₆

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

10 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

Pack of 10

Shuttle to hold 1.0 mm tubes for use with SampleJet system

Tool for cap removal from 1.3 mm MAS rotor

Tools for cap positioning on 1.3 mm MAS rotor

Tool for sample loading into 1.3 mm MAS rotor

Tool for sample compression into 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

Pack of :
• One 1.3 mm ZrO₂ MAS rotor
• Two 1.3 mm SP1 bottom cap (HZ08194)
• Two 1.3 mm SP1 drive caps (HZ14381)

10% Ethylbenzene (EB) in Chloroform-d

40% Dioxane in Benzene-d₆

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

0.05% Trifluorotoluene (TFT) in Chloroform-d

1% Chloroform (CHCl₃) in Acetone-d₆

0.1% Ethylbenzene (EB) in Chloroform-d

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

Pack of 10

99.8% Methanol-d₄

Shuttle to hold 1.7 mm tubes for use with SampleJet system

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

10 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

Tool for cap removal from 1.9 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

Tool for sample loading into 1.9 mm MAS rotor

Tool for sample compression into 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For Low Temperature NMR Experiments

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two tight fit 1.9 mm SP1 bottom caps (HZ16789)
• Two tight fit 1.9 mm SP1 drive caps (H122284)

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284)

10% Ethylbenzene (EB) in Chloroform-d

40% Dioxane in Benzene-d₆

90% Formamide in DMSO-d₆

0.05% Trifluorotoluene (TFT) in Chloroform-d

1% Chloroform (CHCl₃) in Acetone-d₆

3% Chloroform (CHCl₃) in Acetone-d₆

0.1% Ethylbenzene (EB) in Chloroform-d

85% Hexamethyldisiloxan (HMDSO) in Benzene-d₆

25 mM Cyclosporin in Benzene-d₆

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

80% Glycol in DMSO-d₆

0.3% Chloroform (CHCl₃) in Acetone-d₆, 40 mm height filling

100 mg Cholesterylactetate + 0.5% TMS in Chloroform-d (100 mg Cholac)

4% Methanol (CH₃OH) in Methanol-d₄

• For minimizing evaporation in sample tubes
• Box of 10 plugs
• 1 removal rod included

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

99.8% Methanol-d₄

Box of 450 inserts

• Box of 400 tubes
• Caps not included

• Box of 400 tubes
• Caps included

Box of 450 inserts

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

• For minimizing evaporation in sample tubes
• Box of 10 plugs
• 1 removal rod included

Box of 450 inserts

• Box of 100 tubes
• Caps not included

• Box of 100 tubes
• Caps included

Pack of 10

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

Tool for sample loading into 2.5 mm Thin Wall MAS rotor

Pack of 10

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Thin Wall MAS rotor

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

10% Ethylbenzene (EB) in Chloroform-d

40% Dioxane in Benzene-d₆

90% Formamide in DMSO-d₆

0.05% Trifluorotoluene (TFT) in Chloroform-d

1% Chloroform (CHCl₃) in Acetone-d₆

3% Chloroform (CHCl₃) 0.2% TMS in Acetone-d₆

0.1% Ethylbenzene (EB) in Chloroform-d

25 mM Cyclosporin in Benzene-d₆

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

For reference standard samples

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

80% Glycol in DMSO-d₆

4% Methanol (CH₃OH) in Methanol-d₄

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

99.8% Methanol-d₄

Coded caps for SampleJet use

2 mM Lysozyme in H₂O/D₂O 90/10

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

Pack of 10

Shuttle to hold 3.0 mm tubes for use with SampleJet system

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

For use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

Pack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

Tool for cap removal from 4 mm MAS rotor

For use with CRAMPS rotor only

For use with CRAMPS rotor only

For use with CRAMPS rotor only

Tool for sample loading into 4 mm MAS rotor

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps

Tool for sample compression into 4 mm MAS rotor

Individual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

• Individual 4 mm Si₃N₄ MAS rotor (no caps included)
• For use with 4 mm caps: ZrO₂ drive cap (HZ05951)

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

4 mm ZrO₂ MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

Pack of 10

Pack of 10

• Box of 30 tubes
• Caps not included

• Box of 30 tubes
• Caps included

10% Ethylbenzene (EB) in Chloroform-d

40% Dioxane in Benzene-d₆

90% Formamide in DMSO-d₆

0.05% Trifluorotoluene (TFT) in Chloroform-d

100 mg Pamoic acid/mL DMSO-d₆ + 1% TMS

1% Chloroform (CHCl₃) in Acetone-d₆

3% Chloroform (CHCl₃) 0.2% TMS in Acetone-d₆

0.1% Ethylbenzene (EB) in Chloroform-d

85% Hexamethyldisiloxan (HMDSO) in Benzene-d₆

25 mM Cyclosporin in Benzene-d₆

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

80% Glycol in DMSO-d₆

0.3% Chloroform (CHCl₃) in Acetone-d₆, 40 mm height filling

100 mg Cholesterylactetate + 0.5% TMS in Chloroform-d (100 mg Cholac)

4% Methanol (CH₃OH) in Methanol-d₄

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

99.8% Methanol-d₄

Coded caps for use with SampleJet system

2 mM Lysozyme in H₂O/D₂O 90/10

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

Pack of 10

Shuttle to hold 5.0 mm tubes for use with SampleJet system

• Box of 9 tubes
• Caps not included